Solenoid Valves
Direct acting 2 position 3 port solenoid actuated valves for use as pilot valves and for single stage operation with flows up to 15 l/min. A number of solenoid thrusters are available, including industrial enclosures; subsea designs and ATEX approved solenoids for use in potentially explosive hazardous areas. Manufactured mostly from stainless steel, valves are available as standard ported designs or for manifold mounting, and for use with a range of media, including air and other gases, oil, water, water glycol mixes and sea water.
More Information (Link to BIS Valves website.)
Stop and Metering Valves
Stop and metering valves can be supplied to suit your installation configuration requirements, including inline, manifold mounted or cartridge types for inclusion in your own manifold. Stop valves provide a full positive shut-off function, while metering valves, which are mostly supplied with a graduated micrometer style adjustment, can be used to provide speed control or any other simple orifice function where adjustment is required. Pressure compensated flow control valves are also available, providing a constant flow rate in situations where the load or supply pressure varies.
More Information (Link to BIS Valves website.)
3 Ported Directional Control Valves
The 3B series of 2 position 3 ported directional control valves are available for use on a wide range of media, from gases to sea water and many difficult and hazardous chemicals and fluids. Using a balanced poppet design, actuation of these valves is completely independent from the main line pressures, making switching reliable and consistent. With a vent chamber between the main ports and the pilot system, different pilot and main line fluids may be used without fear of accidental mixing or contamination. Various actuation methods are available, including hydraulic and pneumatic pilots, levers and cams.
More Information (Link to BIS Valves website.)
4 Ported Directional Control Valves
The BiS range of 4 port directional valves include both balanced poppet and rotary shear seal designs, commonly used to give control of double acting actuators. The 4R series valves are lever operated 2 or 3 position rotary valves offering 90° manual actuation, in both detented and non-detented configurations, and with a range of centre conditions. They may be used in many different installations, with standard threaded porting, directly mounted on manifolds, or mounted behind panels. When manual control is not required, the 6B range of 2 position 4 way valves offer other methods of actuation, such as hydraulic and pneumatic pilots.
More Information (Link to BIS Valves website.)
Check and Shuttle Valves
The BiS range of inline check valves is a comprehensive range comprising nominal bore sizes from 1/4” to 2”. Manufactured from stainless steel, they are suited to use with a wide range of liquids and gases, with pressures up to 1379 bar (20,000 psi). High cracking pressure check valves are also available by contacting the factory. In addition, there are cartridge check valves for use in manifolds or for direct integration into other equipment. The SV range of shuttle valves may be selected when it is necessary for a valve to select the higher of two pressures, a function often used when redundancy of pilot systems is required.
More Information (Link to BIS Valves website.)
Pilot Operated Check Valves
BiS standard range comprises single and dual pilot operated check valves, decompression checks designed to reduce shock when a high pressure line is opened, and unloader valves. Actuation may be achieved by hydraulic or pneumatic pilot, lever or cam.
More Information (Link to BIS Valves website.)
Relief Valves
A comprehensive range of safety relief and relief valves for use on a wide range of media, from low pressure valves that vent to atmosphere, to high pressure (1379 bar, 20,000 psi) piped return valves. Typically, low pressure valves offer a pop-open style characteristic, while higher pressure valves offer proportional or metering style operation. BiS relief valves are CE marked to denote approval as Category IV safety accessories under the 2014/68/EU Pressure Equipment Directive. Many options are available, including cartridge and manifold mounted versions, and many valves are available in exotic materials via the factory, including monel, inconel, hastelloy and titanium.
More Information (Link to BIS Valves website.)
Excess Flow Valves
The BiS range of excess flow valves are designed to meet the exacting standards of the oil & gas and petro-chemical markets. Their primary function is to shut a line down in the event of breakage or rupture of a downstream pipe or hose, or any other application where excessive flow must be avoided.
More Information (Link to BIS Valves website.)
Filters
A wide range of filtration products, ranging from small component protection filters or strainers to full pressure main line filter units. Available with a wide range of mesh ratings, our F and EF series filters can provide vital protection for contaminant sensitive downstream components, and are particularly designed to protect against rogue pieces of debris that have passed the main line filtration or were built into the system during manufacture. Our SF and DF filters may be used as main line filters in the supply line, and offer various features such as bypasses, clogging indicators, and for the duplex style filters, on-line servicing.
More Information (Link to BIS Valves website.)
Pressure Sensing Valves
The 3SV series-sensing valve is configured to provide a low-pressure signal switch, dependent on a separate sensed pressure of up to 414 bar (6,000 psi). The product can be used to provide a pilot pressure signal to actuate another valve when the status of a second service rises or falls beyond a pre-set pressure.
More Information (Link to BIS Valves website.)
Pumps
The BiS range of low flow piston pumps offer high pressures up to 827 bar (12,000 psi). Designed for use primarily with mineral oil, certain limited use with water glycols is also permitted.
More Information (Link to BIS Valves website.)
Actuators and Solenoid Thrusters
A comprehensive range of actuators. Choose from pneumatic or hydraulic, diaphragm or piston actuators. In addition we also offer Solenoid (Baseefa approved) and manual rotary and linear actuators.
More Information (Link to BIS Valves website.)
Manifold Solutions
BiS currently design and manufacture bespoke manifold solutions. Typically the manifolds are manufactured from 316 stainless steel material ensuring suitability for onshore and offshore environments.
More Information (Link to BIS Valves website.)